Rotordynamics Lab/Tribology Group

 

2013 Technical presentations

 

Authors: Luis San Andrés & students (current and former)

 

ASME Turbo Expo 2013: San Antonio, Texas (June 3-7)

J: accepted for journal publication

 

Paper No.

 

Title

Session Schedule

GT2013-94244

 

On the Failure of a Gas Foil Bearing: High Temperature Operation Without Cooling Flow

Monday, June 03, 2013
14:30 PM-17:30 PM

GT2013-94403

 

The Role of Pivot Stiffness on the Dynamic Coefficients of Tilting Pad Journal Bearings

Wednesday, June 05, 2013
14:30 PM-17:30 PM

GT2013-95975

J

Performance characteristics of metal mesh foil bearings: Predictions vs. Measurements  

Thursday, June 06, 2013
08:00 AM-10:00 AM

GT2013-94321

J

Measurements of Rotordynamic Response and Temperatures in a Rotor Supported on Metal Mesh Foil Bearings

Thursday, June 06, 2013
14:30

GT2013-94273

J

Damping and Inertia Coefficients for Two End Sealed Squeeze Film Dampers with a Central Groove: Measurements and Predictions  

Friday, June 07, 2013
08:00 AM-10:00 AM

 

 

 

STLE Annual Meeting, Detroit, MI (May 5-9)

STLE: Society of Tribologists and Lubrication Engineers

 

Presentation

Leakage for an All-Metal Compliant Gas Seal Operating at High Temperature

Presentation

Experimental Force Coefficients for an Open Ends Squeeze Film Damper Performing

Large Amplitude Circular Orbital Motions, Centered and Off-centered

 

TRC Meeting, College Station, TX (May 22-24)

TRC: TAMU Turbomachinery Research Consortium

 

2013 TRC

TRC funded projects (May 2013)       2013 Annual Progress Report

GROUP Presentation

projects, funding and publications

 

TRC-B&C-03-13

Computational model for tilting pad journal bearings

TRC-SEAL-02-13

Engineered analysis for pocket damper seals and combined labyrinth-brush seals

TRC-SFD-01-13

Linear-Nonlinear force coefficients for squeeze film dampers

TRC 1519 NS

Making a Wet (foamy) seal and estimating its dynamic forced coefficients

TRC-SEAL-01-13

Gas Seal Leakage at High Temperature: a Labyrinth Seal and an All-Metal Compliant Seal of Similar Clearances

TRC-B&C-04-13 & new proposal

Identification of Structural Stiffness and Material Loss Factor in a Shimmed (Generation One) Bump-Type Foil Bearing

new proposal

A test rig for evaluation of tHrust foil bearings/face seals